20
(default function - if not programmed with another function by
your Service Provider).
Aliases (Names)
Aliases are optional names that you can assign to stored
phone and private numbers (or IDs). To edit an alias, see
page 107.
Aliases can be up to 12 characters in length and may consist
of letters, numbers, and spaces.
Aliases are displayed during contact list scrolling or during an
incoming call. Aliases are also used in alphanumeric search
to retrieve numbers from your memory list.
The following screens show examples of how the caller’s
private number can be displayed.
Screen Saver
If your Service Provider configured this feature, the screen
saver will automatically cover the MTM800 Enhanced display
after the MTM800 Enhanced stays idle for a pre-programmed
period of time. If you press a key or a call arrives, the screen
saver is deactivated and the MTM800 Enhanced resumes
standard operation.
You can also activate this feature manually, by pressing the
relevant pre-programmed button (either a side button or
numeric key). For example, if manually activated during a
For information on the function assigned to each Function key,
please refer to your Service Provider.
Private ID
without alias
Private ID
with alias
or
Prvt in Use
180
Prvt in Use
Simon
180
To Next Page
Loading...
