Motorola MTM800 - Selecting a Folder; My Groups Folder

37
TMO Group Call
Selecting a group on receiving a call
If you select a group and a call is incoming, MTM800
Enhanced display remains unchanged while you hear the
call.
During the selection you cannot see calling party information.
Press Cancel when using Navigation Keys and Back when
using Alphabetic/Folder Search, and then calling party
information display appears, if you are still in the call.
Selecting a group during a call
If you start selecting a group during a call, Group In Use or
Emgcy In Use display disappears.
During the selection you cannot see calling party information.
Press Cancel when using Navigation Keys and Back when
using Alphabetic/Folder Search, and then calling party
information display appears again, if you are still in the call.
Selecting a Folder
From the Home display, press Optns. Select Folder, and
select the desired folder. The display shows the last selected
group in that folder.
“My Groups” Folder
You can organise your favorite groups into three folders.
Selecting My Groups
From the Home display, press to quickly access the
folder.
Adding/Deleting Groups from My Groups
For more information, see “My Groups (TMO/DMO)” on
page 128.
When an Emergency Call is received, then dialing is aborted
and Emgcy In Use display appears.