Motorola MTM800 - Entering more; Entering Group Setup; Entering Scan

124
Entering More...
From the main menu, select More... This
sub-menu Contains more customisable
menu items.
Entering Group Setup
From the main menu, select More...
> Group Setup. This sub-menu allows
you to set the Scan and My Groups
features.
Entering Scan
From the main menu, select More...
> Group Setup > Scan.
This sub-menu allows you to activate/
deactivate scanning, view the active
scan list, and edit the scan lists.
Setting Group Scanning
This sub-menu allows you to activate/deactivate the
scanning of a list of pre-defined groups programmed in the
MTM800 Enhanced. The MTM800 Enhanced will join any
group call as long as this group is defined in the scan list and
scan is turned on.
From the main menu, select More... > Group Setup > Scan
> Scanning.
After completing the settings, the display returns to the Scan
sub-menu.
It is not possible to enable or disable group scanning in TXI
Mode.
Back
Select
Messages
Contacts
Browser
Setup
More...
Main Menu
Back
Select
Scan
My Groups
Group Setup
Back
Select
Scanning
Active List
Scan Lists
Scan