123
The Menu
Semi-Auto - Per default the backlights are switched off. You
can switch the backlights on by pressing the Dimmer button
. After a few seconds (configured by your Service
Provider) the backlights switch off automatically.
Auto - Per default the backlights are switched off. The
backlight switches on when any key is pressed, or another
activity - like incoming call - occurs. After a few seconds
(configured by your Service Provider) the backlight switches
off automatically.
To change your backlight settings:
1. From the main menu, select Setup > Display
> Backlight.
2. Press Change.
3. Select required setting.
4. Press Done
to exit.
Setting the Wallpaper
1. From the main menu, select Setup > Display
> Wallpaper.
2. Press Change.
3. Select required setting (On/Off).
4. Press Done
to exit.
Profile
Display
backlight
Keypad
backlight
Status LED
Emergency
button backlight
1. Intensity
High
100% on 100% 100%
2. Intensity
Below High
75% on 75% 100%
3. Intensity
Above Low
50% on 50% 100%
4. Intensity
Low
25% on 25% 50%
5. Intensity Off 0% on 15% 50%
Note: The intensity level can be changed by your Service Provider.
To Next Page
Loading...
