122
• Screen Saver — covers the MTM800 Enhanced display
after the MTM800 Enhanced stays idle for a pre-
programmed period of time (if configured by your Service
Provider).
• Backlight — a backlight lights the display and keypad
when you make or receive a call, or press keys or buttons.
Backlight can be set to Automatic or Disabled.
• Wallpaper — changes the wallpaper that appears on the
idle screen.
Setting the Text Size
1. From the main menu, select Setup > Display > Text Size.
2. Press Change. Select Normal or Zoomed to see the text
on the display in two sizes.
Setting the Screen Saver
1. From the main menu, select Setup
>Display
> Screen Saver.
2. Press Change. Press Change again
and select the screen saver setting:
Auto or Disabled.
3. Scroll to Text. Press Change. Type/
edit the screen saver text using the keypad. (For details on
text editor use, see “Writing Text” on page 157).
4. Press Done
to exit.
Setting the Backlight
Your MTM800 Enhanced has 3 backlight settings:
Manual - By pressing the Backlight Key you can toggle
through 5 intensity profiles. See the table below.
The menu options will display the Screen Saver if your Service
Provider pre-programmed this feature.
Setting the backlight intensity level by pressing the Dimmer
button
will also change the LED, keypad backlight, and
Emergency button backlight intensity.
Screen Saver:
Delete
Ok
Hello
To Next Page
Loading...
