33
TMO Group Call
TMO Group Call
General
A Group Call is an instant communication between you and
others in a talkgroup that you select. Participants may join
(late entry) and leave an on-going Group Call. A talkgroup is
a pre-defined set of subscribers enabled to participate in and/
or invoke a Group Call, that is set up by your Service
Provider.
Talkgroups appear on your display as names or numbers (for
example: Sales, Service, Electricians, Talkgrp10).
Talkgroups can be divided into three folders. Each folder
may contain several talkgroups.
For ease of use, your MTM800 Enhanced also provides the
ability to:
• Perform an alphabetical search of the talkgroup aliases.
Scroll through the entire talkgroup list.
• Organise your favourite groups into three folders (default
name for the first favorite folder is called My Groups which
is set up by your Service Provider).
Your talkgroups may be organized into scan lists (set up by
your Service Provider, or by yourself through the Menu).
When you activate one of these scan lists, your MTM800
Enhanced will continuously monitor the activities of the
selected talkgroups.
By assigning priorities to the talkgroups defined in the scan
list, you will be capable of accepting calls that have higher
priority than the on-going call.
You can start talkgroup, folder, or scanning selection when
the terminal is idle or receiving a call.
While being in a call and dialling another group
simultaneously, do the following to talk in the current call:
1. Exit selection screen.
To Next Page
Loading...
