51
DMO Group Call
Making a DMO Group Call via Gateway
1. While in DMO, choose a gateway as described in
“Selecting DMO Group Call via Gateway” on page 47.
2. Place the call for the selected talkgroup:
• If you press PTT while the gateway is not available, you
will start a DMO call without gateway. The Gateway icon
will disappear.
• If you press PTT while the selected
gateway is available, but the call is
rejected by the gateway, your
MTM800 Enhanced will sound a
tone and display the following
screen, informing you that the call
will be setup without gateway. The Gateway icon will
disappear.
• If you press PTT while the gateway is available, you will
start a DMO call with gateway. The Gateway icon will be
solid.
Making a DMO Group Call via Repeater
1. While in DMO, choose the Repeater option as described in
“Selecting DMO Group Call via Repeater” on page 49.
2. Place the call for the selected talkgroup:
• If you press PTT while the repeater is not available, you
will start a DMO call without repeater. The Repeater icon
will disappear.
• If you press PTT while the selected repeater is available,
but the call is rejected by the repeater your MTM800
Enhanced will sound a tone and display the following
screen, informing you that the call will be setup without
repeater. The Repeater icon will disappear.
MS-MS Call
To Next Page
Loading...
