60
3. To end the call, press .
Private Call in DMO
If configured by your Service Provider it is possible to make
and receive a Private Call in DMO. You can make or receive
a DMO Private Call only when your MTM800 Enhanced is in
DMO.
The calling and called party shall be on the same talkgroup.
Making a Private Call in DMO
1. From the Home display enter a
number.
Dialing via
• Contact List or
• Recent Calls Lists
works like described in “Other Ways of
Dialing” on page 58.
2. Press and hold PTT. Wait for the talk permit tone (if
configured) before talking, and release the PTT when
listening.
3. The call ends after a pre-programmed time, or if you
press .
Your terminal can alert you of an incoming call. Select the alert
settings in the Tones menu items
Private Calls via DMO Repeater and/or DMO Gateway are not
supported.
There is no presence check for Private Calls in DMO. This
means you don’t know whether the called party is available
when you starts the call.
Private #:
2234
Delete
CType
DMO Folder 1
To Next Page
Loading...
