39
TMO Group Call
Making a Group Call
1. From the Home display and if this is the
required group, press and hold the
PTT.
2. Wait for the talk permit tone (if
configured) and then speak into the
microphone. Release the PTT button
to listen.
When you start a call, all members of the
selected group who have their units
turned on, will receive the Group Call
.
Receiving a Group Call
General
Unless it is engaged in a call, your MTM800 Enhanced will
receive the Group Call.To answer the call, press and hold
PTT.
Your MTM800 Enhanced shows the Group name and the
caller’s private number or name if previously stored in your
contact list.
The following screens show examples of how the caller’s
private number (ID 124) is displayed.
The “No Group” message is displayed when you are out of the
normal coverage area of your selected group. You must then
select a new group that is valid for your working location.
If you are in an on-going Group Call and wish to make a new
call, press to ignore the current call. Start the new call
.
Network 1
Folder 1
Police
Hello
Contcs
Optns
Group In Use
ID:2234
Police
Folder
Optns
To Next Page
Loading...
