81
GPS Location Service
GPS Icon
When your terminal is receiving valid GPS location data, a
GPS icon will be shown in the display:
Please note, that during emergency mode, your terminal will
not display the GPS icon even when receiving GPS location
data. If valid GPS location data is available when you leave
emergency mode the GPS icon will be displayed again.
GPS Enable/Disable
1. From the main menu, press the Menu
button and select More... > Location
> Interface.
The current selection (On/Off) is
highlighted.
2. Select the new choice. The display
shows:
On — Location Service On
Off — Location Service Off
Entering GPS Location Service
To enter the GPS sub-menu, press the
Menu button and select More...
> Location:
Position — provides the actual position
information.
Interface — allows you to enable/disable
the GPS location service.
Scroll to your selection and press Select to access the next
display.
On
Off
Back
Select
Interface
Position
Interface
Back
Select
Location
To Next Page
Loading...
