141
The Menu
9 kbps (e.g.) — active packet data session.
N.A. — standby packet data session.
Viewing Bandwidth Status
The bandwidth percentage represents the number of
allocated time slots (“channels”) during the data session.
1. Select Bandwidth in the Packet Data
sub-menu.
2. The bandwidth percentage is shown
75% (e.g.) — active packet data
session,
N.A. — standby packet data session.
Viewing Encryption Status
1. In the Packet Data sub-menu select
Encryption.
2. The encryption state of the ongoing
packet data session is displayed:
• Encrypted
• Not Encrypted (clear)
Your Service Provider has set the maximal number of time slots
to allocate to 1, 2, 3, or 4. The bandwidth percentage refers to
the possible number of slots (1, 2, 3, or 4) as 100%.
Example:
50% is displayed, if 2 of 4 possible slots are allocated.
100% is displayed, if 4 of 4 possible slots are allocated.
100% is displayed, if 1 of 1 possible slot is allocated.
Back
Bandwidth
75%
Back
Packet Data
Encrypted
To Next Page
Loading...
