Motorola MTM800 - Page 128

120
2. Time only - The MTM800 Enhanced displays time only.
Format Date sub-menu is disabled.
3. Date Only - The MTM800 Enhanced displays date only.
Format Time sub-menu is disabled.
4. Off - The MTM800 Enhanced does not display time nor
date. Format menu is disabled.
Scroll to the desired setting and press Select
. Press Back to
exit.
Setting Time Format
To change displayed time format between 24-hour scale and
12-hour scale:
1. From the main menu, select Setup > Time & Date
> Format > Format Time.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Setting Date Format
To change displayed date format between DD/MM/YY, MM/
DD/YY and DD-MON-YY:
1. From the main menu, select Setup > Time & Date
> Format > Format Date.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Setting Time
To set time:
1. From the main menu, select Setup > Time & Date > Set
>Set Time.
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.