136
2. Type your User PIN
When the User PIN is highlighted press
Select and type your User PIN on the
next screen then press OK.
3. Logging
From this point the request to logon is
sent. You can stop the logging process
by pressing Cancel. When the logging
process ends the display is changed to
idle screen.
Log Off
You can change the state that you are logged on by pressing
> Setup > RUI > Log Off from the idle screen. The
radio prompts to accept log off state or to deny it (if you
selected it by mistake).
Book On
Any radio (if the Book On is enabled by
the Service Provider) can be assigned
by the service provider to one person.
You are going to see only screen with
your login and the full service is granted
from this point.
Colour blue of the display is when the user is in full service
mode. In other case the greyscale screen are displayed.
User ID:
___________Me
User PIN: ____
Select
RUI Logon
Back
OK
User PIN:
Cancel
Logging...
Cancel
MENU
OK
Book on
Granted assignment
perdio: 6 hours
To Next Page
Loading...
