138
Selecting Home Only Network Registration
From the main menu, select More... > Networks
>Networks Sel >Home Only.
Selecting this sub-menu causes your MTM800 Enhanced to
recognise the first network on the allowed network list only
and to register to it.
Using the Select Net Registration
If configured by your Service Provider, this sub-menu allows
you to select manually the network from the allowed network
list you want your MTM800 Enhanced to be registered to.
1. From the main menu, select More... > Networks
> Networks Sel > Select Net.
2. The list of the allowed networks is displayed. Scroll to the
desired network.
A network may have an alias. Press the Menu button to
view the network ID. Then press Select.
3. Return to the Home display. The display shows the network
ID or alias.
Selecting Trunked Mode
This sub-menu allows you to select the
mode your MTM800 Enhanced will be
operating on.
To set up your operating mode:
1. From the main menu, select More...
> Network > Trunked Mode.
2. The MTM800 Enhanced switches to Trunked Mode.
It is up to your Service Provider to ensure your own MTM800
Enhanced identity is allowed to register on other networks in
your list. Some groups may not be available on other networks.
It is not possible to switch from Direct Mode to Trunked Mode, if
the MTM800 Enhanced is in Transmit Inhibit Mode.
Back
Select
Networks Sel
Trunked Mode
Direct Mode
TXI Mode
Networks
To Next Page
Loading...
