18
To use the one-touch feature:
• Press and hold the required
assigned key for a few
seconds.
Your MTM800 Enhanced will display the number and act
according to the programmed feature.
Previous Talkgroup
Switch
Switches to the previous talkgroup
(even if the operation mode was
different)
Talkgroup Scan Toggles on/off the Talkgroup Scan
function (TMO only)
DMO/TMO Toggles between DMO and TMO
Status Message Sends a dedicated status message to a
dedicated address
Text Message Template Sends a predefined/user defined
template to a dedicated address
Call Dial (Private,
Phone, PABX)
Initiates a call to a predefined entry in
the contact list
Transmit Inhibit (TXI) Toggles between activated and
deactivated TXI Mode.
Screen Saver Activates screen saver.
Backlight Adjustment Toggles through the backlight intensity
profiles.
Covert Mode Toggles on/off covert mode
Time & Date Shows time and date.
If dialing via one-touch assigned key is enabled, one-touch dial
is disabled (see page 64).
The required time you need to press the assigned keys to
activate a one-touch function is set as default to 1 second. This
time may be set, however, by your Service Provider.
For information on the function assigned to each assigned key,
please refer to your Service Provider.
Feature Description
To Next Page
Loading...
