35
TMO Group Call
For group scrolling configuration, see page 38.
Using the Rotary Knob
(If configured by your Service Provider)
From the Home display, press shortly on the Rotary knob and
rotate until the requested group appears.
Group selection occurs:
• After a time-out
• By pressing Select (if configured by your Service Provider)
Using the Navigation Key
From the Home display, scroll left or right until the requested
group appears. Then press Select to confirm selection.
Pressing the PTT will also choose the group automatically
and start transmission.
Using Alphabetic Search
From the Home display, press Optns. Select a group by abc
search (“TG by abc”). You can type up to 12 characters that
are shown at the bottom of the screen while you are typing. It
will highlight the closest talkgroup name. Press Select to
enter the group.
Using Folder Search
From the Home display, press Optns. Select a group by
folder search (“TG by Folder”). Select the folder name and
select the group.
When you navigate in the favorite folders and select a DMO
group, your terminal will switch between TMO and DMO (and
vice-versa).
To Next Page
Loading...
