Motorola MTM800 - Page 62

54
Receiving a DMO Group Call (MS - MS)
When an InterMNI call is received, you can press Network to
see the Network alias and/or number.
Receiving a Group Call (via Gateway / Repeater)
The display shows the ID of the TMO caller.
The Gateway plus DMO or the Repeater icons are displayed
accordingly to the ongoing call type (Gateway or Repeater).
• If MS to MS mode is selected, and the terminal receives
a call via repeater, the Repeater icon will be shown (if the
repeater mode is enabled by the Service Provider, otherwise
the call will not be accepted).
• If Gateway mode is selected but a gateway is not available,
The Gateway icon will be solid in case of an incoming
gateway call.
Without alias and
Private ID
Private ID
without alias
Private ID
with alias
Open Group Call InterMNI Call
Group in Use
Folder 1
TG4
Folder
Optns
Group in Use
ID:124
TG4
Folder
Optns
Group in Use
ID:David
TG4
Folder
Optns
OR OR
OR
Group in Use
ID:David
Open Group
Folder
Optns
Group in Use
ID:...124
TG4
Folder
Optns
Without alias and
Private ID
(e.g. via gateway)
Private ID
without alias
(e.g. via gateway)
Private ID
with alias
(e.g. via repeater)
OR
OR
Group in Use
Folder 1
TG4
Folder
Optns
Group in Use
ID:124
TG4
Folder
Optns
Group in Use
ID:David
TG4
Folder
Optns