118
You can also define via the menu to have all Group calls in
high audio or controlled by the Speaker Control key.
1.
From the main menu, select Setup > Audio > Audio
Toggle.
2.
The display shows the current audio setting. When set to
Always Loud, the audio sounds from the speaker (high
audio). When set to Speaker Control, the audio will sound
from the earpiece or the speaker, per Speaker Control key
use.
3.
Select the required setting.
Setting Tones
From the main menu, select Setup > Tones.
This sub-menu allows you to activate/
deactivate the MTP850 Ex/MTP810 Ex tones.
For a detailed list of tones, see “Tones” on
page 159.
Setting Keypad Tone
To activate/deactivate keypad tone at every key press:
1.
From the main menu, select Setup > Tones > Keypad
Tone.
2.
Scroll through the settings (On/Off).
3.
Choose required setting, and press Select
,
or press Back
to exit.
Setting All Tones
To activate/deactivate all tones (keypad tone and other
activity tones used in your MTP850 Ex/MTP810 Ex):
1.
From the main menu, select Setup > Tones > All Tones.
2.
Scroll through the settings (On/Off).
3.
Choose required setting, and press Select
,
or press Back
to exit.
Tones
All Tones
Talk Permit
Keypad Tone
Select Back
Clear to send
To Next Page
Loading...
