117
In Data Only and in Voice & Data, the Data Connected icon is
displayed after you have connected the MTP850 Ex/MTP810
Ex to the external device and the MTP850 Ex/MTP810 Ex is
ready for data transfer. The Data Transmit/Receive icon is
displayed to indicate data is being transferred to/received
from the external device.
The MTP850 Ex/MTP810 Ex ends the Ambience Listening
(AL) call and the microphone is closed when the MTP850 Ex/
MTP810 Ex is in one of the following states:
• Entering the out-of-service area
• Outgoing packet data call setup
To exit data, return to Data Setup and select Voice Only
.
The MTP850 Ex/MTP810 Ex returns automatically to Voice
communication.
Setting Audio Profiles
An audio profile is a profile that adjusts the audio parameters
of the terminal to fit its current operating environment.
To set an Audio Profile, from the main menu select Setup
> Audio > Audio Profile. Scroll and choose your required
template.
Setting Audio
You can control audio routing (speaker/earpiece) for any
Private or Group Call via the dedicated Speaker Control key
(see page 25.)
Data services are available only in TMO. Data Services are
blocked in TXI Mode.
When set to Voice Only, the built-in data modem is disabled to
conserve battery power.
To Next Page
Loading...
