Motorola SYMBOL DS3578 - Page 363

A - 2 Symbol DS3578 Digital Scanner Product Reference Guide
Parameter Broadcast (Cradle Host Only) Enable 4-21
Pairing Modes Unlocked 4-22
Pairing on Contacts Disable 4-23
Connection Maintenance Interval 15 min 4-24
Authentication Disable 4-27
Pin Code Static 4-28
Encryption Disable 4-29
User Preferences
Default Parameters Restore Defaults 5-4
Beeper Tone Medium 5-5
Beeper Volume High 5-6
Laser On Time 3.0 sec 5-7
Beep After Good Decode Enable 5-7
Pager Motor Actuation on Good Decode Enable 5-8
Beep on Insertion Enable 5-8
Time Delay to Reduced Power Mode 1 Second 5-9
Picklist Mode Disabled Always 5-10
Decoding Illumination Enable 5-10
DPM Scanning Enable 5-11
Decode Aiming Pattern Enable 5-12
Transmit Code ID Character None 5-13
Prefix Value 7013 <CR><LF> 5-14
Suffix Value 7013 <CR><LF> 5-14
Scan Data Transmission Format Data As Is 5-15
FN1 Substitution Values Set FN1 Substitution Value 5-17
Transmit “No Read” Message Disable No Read 5-17
Synapse Interface Standard Synapse Connection 5-18
Batch Mode Normal (Do Not Batch Data) 5-19
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.