Motorola SYMBOL DS6707 - Appendix C: Sample Bar Codes; Upc;Ean

Standard Default Parameters A - 5
Hardware Handshaking None 8-13
Software Handshaking None 8-15
Host Serial Response Time-out 2 Sec 8-17
RTS Line State Low RTS 8-18
Beep on <BEL> Disable 8-18
Intercharacter Delay 0 msec 8-19
Nixdorf Beep/LED Options Normal Operation 8-20
Ignore Unknown Characters Send Bar Code 8-20
123Scan
2
Configuration Tool
123Scan
2
Configuration None
1
9-1
Disable All Code Types
10-7
UPC/EAN
UPC-A 01h Enable 10-8
UPC-E 02h Enable 10-8
UPC-E1 0Ch Disable 10-9
EAN-8/JAN 8 04h Enable 10-9
EAN-13/JAN 13 03h Enable 10-10
Bookland EAN 53h Disable 10-10
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
10h Ignore 10-11
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
F1h 43h
F1h 44h
10-14
UPC/EAN/JAN Supplemental Redundancy 50h 10 10-15
UPC/EAN/JAN Supplemental AIM ID Format F1h A0h Combined 10-16
Transmit UPC-A Check Digit 28h Enable 10-17
Transmit UPC-E Check Digit 29h Enable 10-17
Transmit UPC-E1 Check Digit 2Ah Enable 10-17
UPC-A Preamble 22h System Character 10-19
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.