8 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide
RS-232 Host Types (continued)
2
The CUTE host disables all parameter scanning, including Set Defaults. If you inadvertently select CUTE, scan
*Enable Parameter Scanning (01h) on page 4-5, then change the host selection.
Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the digital imager scanner's baud rate to match
the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted
form.
OPOS/JPOS
Fujitsu RS-232
CUTE
2
Baud Rate 600
Baud Rate 1200
To Next Page
Loading...
