Motorola SYMBOL DS6707 - Revision History

iv Symbol DS6707 Digital Imager Scanner Product Reference Guide
Revision History
Changes to the original manual are listed below:
Change Date Description
-01 Rev A 8/2006 Initial Release.
-02 Rev A 4/2007 Updated service information, updated operating temperature and drop
specifications, added Host Trigger Mode option, added new UPC/EAN
supplemental options, changed RSS references to GS1 DataBar,
added following parameters: Illumination Bank Control, Fixed Exposure, Fixed
Gain, Gain/Exposure Priority for Snapshot Mode, Image Brightness, JPEG Target
File Size, Image Enhancement, Bookland ISBN format, 4State Postal, Inverse 1D,
Data Matrix Inverse, Micro QR, QR Inverse, Aztec, Aztec Inverse
-03 Rev A 8/2007 Updated decode zone/range information
-04 Rev A 8/2008 Added DP and HD model information, added Fuzzy 1D, Decode Mirror Images,
Low Light Enhancement, and Presentation Mode Field of View parameters, updated
Signature Capture Width and Height options, added Code 128 Lengths and Post
US4, changed code type name from UCC/EAN-128 to GS1-128
-05 Rev A 10/2008 Updated wall mount template, added separate dimensions and weight
specifications for the Symbol DS6707-DP model, added custom defaults options,
added specific string search and new move cursor options in ADF chapter
-06 Rev A 5/2009 Added ISSN EAN, Matrix 2 of 5, and Chinese 2 of 5 code types, added ISBT
concatenation parameters.
-07 Rev A 9/2009 Added DS6707 with base model, added cable installation/removing instructions,
presentation mode bar code parameters and updated technical specifications.
Added RS-232 parameters: Code 39 Full ASCII, PDF417, GS1 Databar 14/Limited/
Expanded.
-08 Rev A 12/2010 Added DS6707-HC configuration, Mobile Phone Display and Mobile Phone Decode
Aggressiveness parameters, CUTE parameters, added all Image Kit paramters,
Simulated Scan Base Mode, Presentation Time Delay Mode, Added Send Alt 2
parameter and corrected Send Alt @ parameter in ADF chapter, updated
Maintenance section, updated 123Scan
2
chapter, corrected Terminal Specific RS-
232 Olivetti column: ETX changed from 1002 to 1003 and STX changed from 1003
to 1002.