1 - 6 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Wall Mount
To use the optional wall mount to mount the digital imager scanner on a wall, place the mount in the desired
location on the wall and secure by inserting two screws* appropriate for the mounting surface through the screw
holes on the mount, and into the surface. Insert the digital imager scanner into the mount as shown.
Figure 1-7
Securing the Wall Mount
*The recommended screws are two #6 screws (1” long) and two #6 washers.
For convenience, print this page and use the template below for mounting hole locations.
Figure 1-8
Wall Mounting Template
2.98”
Insert mounting screw Insert mounting screw
To Next Page
Loading...
