Motorola SYMBOL DS6707 - Boot up Event; Parameter Event

5 - 16 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Boot Up Event
Parameter # F0h, 02h
When enabled, the digital imager scanner generates a message to the host when power is applied. When disabled,
no notification is sent.
Parameter Event
Parameter # F0h, 03h
When enabled, the digital imager scanner generates a message to the host when one of the events specified in
Table 5-2 on page 5-15 occurs. When disabled, no notification is sent.
Enable Boot Up Event
(01h)
*Disable Boot Up Event
(00h)
Enable Parameter Event
(01h)
*Disable Parameter Event
(00h)