Motorola SYMBOL DS6707 - Chapter 5 SSI Interface; Introduction

Chapter 5 SSI Interface
Introduction
This chapter describes how to set up the digital imager scanner with a Simple Serial Interface (SSI) host. When
using SSI, program the digital imager scanner via bar code menu or SSI host commands.
Throughout the programming bar code menus, default values are indicated with asterisks (
*).
*Baud Rate 9600
(06h)
Feature/Option
* Indicates Default
Option Hex Value for
programming via SSI
command
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.