User Preferences & Miscellaneous Digital Imager Scanner Options 4 - 7
Power Mode
Parameter # 80h
This parameter determines whether or not power remains on after a decode attempt. In reduced power mode, the
digital imager scanner enters into a low power consumption mode to preserve battery life after each decode
attempt. In continuous power mode, power remains on after each decode attempt.
Time Delay to Low Power Mode
Parameter # 92h
This parameter sets the time the digital imager scanner remains active after decoding. The digital imager scanner
wakes upon trigger pull or when the host attempts to communicate with the digital imager scanner.
*Continuous On
(00h)
Reduced Power Mode
(01h)
NOTE This parameter only applies when Power Mode is set to Reduced Power.
1 Second
(11h)
5 Seconds
(15h)
*1 Minute
(21h)
To Next Page
Loading...
