Motorola SYMBOL DS6707 - Connecting Using Simple Serial Interface

5 - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Connecting Using Simple Serial Interface
Connect the digital imager scanner to an SSI host.
Figure 5-1 SSI Host Connection
Figure 5-2 SSI Host Connection for Scanner with Base
1. Attach the modular connector of the interface cable to the cable interface port on the digital imager scanner
(see Installing the Interface Cable on page 1-3).
2. Connect the other end of the interface cable to the serial port on the host.
3. Connect the power supply to the serial connector end of the interface cable. Plug the power supply into an
appropriate outlet.
Interface Cable
Serial Port Connector
to Host
Power Supply Cable
Interface Cable
Base
Serial Port
Connector to Host
Power Supply Cable