8 - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide
RS-232 Parameter Defaults
Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the RS-232 Host Parameters section beginning on page 8-5.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 8-1
RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard 8-7
Baud Rate 9600 8-8
Parity Type None 8-11
Stop Bit Select 1 Stop Bit 8-12
Data Bits 8-Bit 8-12
Check Receive Errors Enable 8-13
Hardware Handshaking None 8-13
Software Handshaking None 8-15
Host Serial Response Time-out 2 Sec 8-17
RTS Line State Low RTS 8-18
Beep on <BEL> Disable 8-18
Intercharacter Delay 0 msec 8-19
Nixdorf Beep/LED Options Normal Operation 8-20
Ignore Unknown Characters Send Bar Code 8-20
To Next Page
Loading...
