2
Press and navigate to VOX LEVEL.
3
Press and navigate to the suitable sensitivity
level.
4
Press to confirm on selection.
NOTICE:
The VOX levels ranges from LOW, MEDIUM to HIGH.
3.10
Resetting to Factory Defaults
This feature sets all radio features back to the default
settings.
Press PTT, SB2, and SB1 simultaneously while turning on
the radio until you hear a high tone chirp.
3.11
Enabling or Disabling Beep Tone
The following steps explain how to enable and disable
beep tone:
1
Press and navigate to SETTING.
2
Press and navigate to BEEP TONE.
3
Press and navigate to ON/OFF.
4
Press to turn the Beep Tone on or off .
3.12
Locking or Unlocking Keypad
You can lock the keypad to avoid accidentally changing
your radio settings. The following steps explain how to lock
and unlock keypad:
English
38 Send Feedback
To Next Page
Loading...
Need help?
General
