NOTICE:
The radio display shown here is for icon location
only. Each radio display may appear differently
(channel and code) based on the pre-programmed
features available for each model or region.
Pressing any button, except the PTT button, turns
the backlight on.
3.4
Selecting A Channel
Press or twice at Home screen to navigate to
the next channel.
Each channel has its own Frequency, Interference
Eliminator Code, and Scan Settings.
3.5
Receiving A Call
The following steps explain how to receive call:
1 Release the PTT button and listen for voice activity.
2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5 cm) from mouth. Press the PTT button to
talk; release it to listen.
The LED stays solid red when the radio is receiving
or transmitting.
See Making a Call from CONTACTS menu on page 44 to
make a all.
3.6
Signal Strength Indicator and
Channel Busy Indicators
When there is an activity on a frequency, the Signal
Strenght Indicator icon (without bars) blinks and the radio
LED stays solid orange. The radio Signal Strength Indicator
icon can change from 1 (weakest) to 3 (strongest)
depending on the radio reception coverage. When the radio
is in receiving mode, the radio displays the Signal Strength
Indicator icon with bars.
NOTICE:
Obstacles blocking the signal path may affect the
incoming signal.
English
Send Feedback 33
To Next Page
Loading...
Need help?
General
