1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the side button that have been programmed
with One Touch Access.
The LED lights up in solid red.
3 Wait for the Talk Permit Tone to end (if enabled) and
start speaking.
4 Press the One Touch Access programmed button
again to end the transmission.
5 Within the call's hold time, press PTT button to reply
on the ongoing call.
4.3.5
Quick Contact
Quick Contact allows you to make a private call by pressing
an assigned quick contact key.
NOTICE:
This feature is only available in Digital Mode and it
is applicable for group call and private call only.
4.3.5.1
Editing Quick Contact
The following steps explain how to edit quick contact:
1
Press and navigate to CONTACTS.
2
Use or to scroll across the list of
selections.
3
Select the radio contacts and press .
4
Navigate to QUICK CONTACT and press .
5
Use or to scroll across the list of
selections and select the number for Quick Contact.
6
Press
to confirm on selection.
The radio displays a to indicate activation is made.
English
46 Send Feedback
To Next Page
Loading...
Need help?
General
