ioLogik E1200 Series Using the Web Console
RESTful API Setting
The ioLogik E1200 supports RESTful API. To enable this API, select the Enable Restful API checkbox.
EtherNet/IP Setting
The ioLogik E1200 supports the EtherNet/IP protocol. To enable the protocol, select the Enable Ethernet/IP
Protocol checkbox.
EtherNet/IP function needs to be activated before it can be used. See Chapter 5 for details.
ioLogik E1200 series only supports EtherNet/IP adapter mode. The maximum number of connections
9 for read-only, and 1 for read/write.
System Management
Network Connection
TCP connections from other hosts appear on the Network Connection page. This information can assist you with
managing your devices.
To Next Page
Loading...
Need help?
General
