MGate 5105-MB-EIP Series User Manual
On the first page of the web console, enter the admin for the default Account name and moxa for the
default Password.
Quick Setup
In most cases, users find it difficult to complete the MGate's configuration. Therefore, the MGate Series now
provides Quick Setup, an illustrated guide especially designed to make configuration easy. When you press
Quick Setup, you will access the mode and configure. Only a few steps are needed. For a detailed parameter
description, please refer to Chapter 3 and Chapter 4.
NOTE
The Quick Setup function is not supported by northbound protocols of MQTT/Cloud feature from version
4.0 or above firmware.
System Setup
First, configure the Server Settings to identify the units and Network Settings of the MGate.
To Next Page
Loading...
