MGate 5105-MB-EIP Series User Manual
7. A message will show that MGate Manager is successfully installed. You may choose to run it
immediately by selecting Launch MGate Manager.
8. You may also open MGate Manager through Start > Programs > MGate Manager > MGate
Manager, as shown below.
Starting MGate Manager
MGate Manager is a Windows-based utility that is used to configure the MGate 5105-MB-EIP. Before running
MGate Manager, make sure that the MGate 5105-MB-EIP is connected to your PC. You may open MGate
Manager from the Windows Start menu by clicking Start > Programs > MGate Manager > MGate
Manager. The MGate Manager window should appear as shown below.
To Next Page
Loading...
