Moxa Technologies MGate 5105-MB-EIP Series - Web Console Configuration and Troubleshooting; Overview

MGate 5105-MB-EIP Series User Manual
70
4. Web Console Configuration and
Troubleshooting
Overview
The MGate 5105-MB-EIP supports configuration and troubleshooting by web console. This chapter will focus
only on the settings that can be configured by web console. These include monitoring and troubleshooting
functions, such as how to check I/O data transmission, troubleshoot configurations, run diagnostics, etc.
More detailed information about other configuration settings can be found in Chapter 3.
To connect to the MGate web console, open a web browser and enter the MGate gateway’s IP address.
http://<MGate IP address>
or
https://<MGate IP address>
On the first page, specify the account type and enter the password. Only two types of accounts are
supported: admin and user. The admin account can change all the settings, whereas the user account only
can view settings and cannot change any configurations. The default password is moxa.
All available configuration items are listed in the left panel tree. Click on an item to view detailed options in
the panel area on the right. To activate changes, click the Submit button before leaving the current page. If
necessary, the MGate gateway will restart to activate the settings.