MGate 5105-MB-EIP Series User Manual
As the firmware is written to the unit, progress is displayed in the window.
ATTENTION
DO NOT turn off the MGate power before the firmware upgrade process is completed. The MGate will erase
the old firmware to make room for the new firmware to flash memory. If you power off the MGate and
terminate the progress, the flash memory will contain corrupted firmware and the MGate cannot boot. If
this happens, call Moxa RMA services.
Once the firmware has been successfully written onto the unit, click Exit to close the Upgrade Firmware
window. MGate Manager will automatically execute a Broadcast Search for all MGate units on the LAN. Your
MGate should reappear in the list of units.
Import/Export
There are three main reasons for using the Import and Export functions.
• Applying the same configuration to multiple units
The Import/Export configuration function is a convenient way to apply the same settings to units in
different sites. You can export the configuration as a file and then import the configuration file onto
other units at any time.
• Backing up configurations for system recovery
The export function allows you to export configuration files that can be imported onto other gateways to
restore malfunctioning systems within minutes.
• Troubleshooting
Exported configuration files can help administrators to identify system problems that provide useful
information for Moxa’s Technical Service Team when maintenance visits are requested.
To Next Page
Loading...
