MGate 5105-MB-EIP Series User Manual
EtherNet/IP Configuration
If you select EtherNet/IP Scanner as your device, MGate 5105-MB-EIP will be configured as Ethernet/IP
Adapter. In Adapter mode, you can choose Automatic configuration to automatically map O(T (Originator
to Target) and T(O (Target to Originator) data sizes to Modbus data.
If you select EtherNet/IP Adapter as your device, the MGate 5105-MB-EIP will be configured as Ethernet/IP
Scanner. In Scanner mode, you must designate the parameters for each connection. Refer to your
EtherNet/IP adapter’s datasheet to fill out O(T and T(O parameters.
To Next Page
Loading...
