Moxa Technologies MGate 5105-MB-EIP Series - Network Settings

MGate 5105-MB-EIP Series User Manual
44
Network Settings
The Network tab is where the unit’s network settings are configured. You can change the Name, Network
Configuration, IP Address, Netmask, Default Gateway, and DNS.
Ethernet Settings
Parameter
Value
Notes
IP Configuration Static IP, DHCP, BOOTP
Select Static IP if you are using a fixed IP address. Select
one of the other options if the IP address is set
dynamically.
IP Address
192.168.127.254
(or other 32-bit number)
The IP (Internet Protocol) address identifies the server on
the TCP/IP network.
Netmask
255.255.255.0
(or other 32-bit number)
This identifies the server as belonging to a Class A, B, or C
network.
Gateway
0.0.0.0
(or other 32-bit number)
This is the IP address of the router that provides network
access outside the server’s LAN.
DNS Server
Parameter
Value
Notes
DNS Server 1
0.0.0.0
(or other 32-bit number)
This is the IP address of the primary domain name server.
DNS Server 2
0.0.0.0
(or other 32-bit number)
This is the IP address of the secondary domain name
server.