MGate 5105-MB-EIP Series User Manual
Configure Device
On the first page, you can change the device name and time zone settings.
Server Setting
Server Name (an alphanumeric string)
You can enter a name to help you identify the unit, such as
the function, etc.
Server Location (an alphanumeric string)
You can enter a name to help you identify the unit location.
Such as “Cabinet A001.”
Time Settings
The MGate 5105-MB-EIP has a built-in Real-Time Clock for time calibration functions. Functions such as the
log function can add real-time information to the message.
ATTENTION
First-time users should select the time zone first. The console will display the “real time” according to the
time zone relative to GMT. If you would like to change the real-time clock, select Local time. MGate’s
firmware will modify the GMT time according to the Time Zone.
Time Zone User selectable time zone
This field shows the currently selected time zone and
allows you to select a different time zone.
Local Time
(1900/1/1-2037/12/31)
Time Server
IP or Domain address
(e.g., 192.168.1.1 or
time.stdtime.gov.tw)
This optional field specifies your time server’s IP address or
domain name if a time server is
used on your network. The
module supports SNTP (RFC-1769) for automatic time
calibration.
The MGate will request time information from the specified
time server every 10 minutes.
ATTENTION
When modifying the local time, select the time zone first. The time display will be updated to reflect the
specified time zone.
To Next Page
Loading...
