MGate 5105-MB-EIP Series User Manual
Modbus RTU/ASCII Configuration
As with the Modbus RTU/ASCII setup, start by checking if you already have configured the serial parameters
on Serial Settings page.
In RTU/ASCII Slave mode, the MGate gateway works as a Modbus server/slave device and waits for the
incoming query from the Modbus client/master device. You only need to identify the Modbus Slave ID when
in Slave mode.
In RTU/ASCII Master mode, the MGate works as a Modbus client/master device and will send the Modbus
request to the Modbus network actively.
To Next Page
Loading...
