MGate 5105-MB-EIP Series User Manual
Azure IoT Device Configuration
If you select Azure IoT Hub as your northbound connection, the MGate 5105-MB-EIP will be configured as
an Azure IoT device. In Azure Device mode, you can set up the Azure device basic settings, connection lost
data settings, and advanced settings.
Device connection string
Azure IoT Device connection string, e.g.:
HostName=IoTDataHub1.azure-
devices.net;DeviceId=MGate5105;SharedAccessKey=exFG12aGH25lnbfgHJK
LO4NMpTsJhL7m4AZZMfqKbLLo=
Buffering on microSD Card Disable
Data storage function on SD card
lost under IoT connection
Buffer size 0 to 2,048 MByte 128
The maximum capacity of data
storage. The instructed value listed
would vary, depending on the size
of the inserted microSD card. If the
value shows 0 - 0 MB, it means
that a microSD card is not inserted.
Buffer Overflow
Overwrite the
oldest data frame/
Stop buffering
Overwrite the
oldest data frame
Data deleting mechanisms while
reaching maximum capacity of data
storage:
Overwrite the old data when
storage is full.
Stop updating data when storage is
Cyclic Sending Intervals 50 to 60000 ms 300
The frequency of uploading data to
the cloud when the IoT connection
is recovered
To Next Page
Loading...
