Moxa Technologies MGate 5105-MB-EIP Series - Page 48

MGate 5105-MB-EIP Series User Manual
48
Parameter
Value
Notes
Name
Name
Connection
Enable, Disable
Enable or disable this connection.
Adapter IP address
and Port
IP address
Port: 1 to 65535
Default EtherNet/IP port is 44818
Instance number
1 to 2147483647
Data size
O->T: 0 to 496
T->O: 0 to 496
Real-time formats Modeless, 32-bit Header
Default O->T format is 32-bit Header.
Default T->O format is modeless.
Packet rate
0 to 3000 ms
Command polling interval time.
Fault Protection
Keep latest data, clear data
to zero, user-defined value
For EtherNet/IP Scanner mode, the opposite side refers to
the Modbus side. If the Modbus connection fails, the
gateway cannot receive the Modbus command, but the
gateway will continuously send output data to the
EtherNet/IP adapter. To avoid problems in case the
Modbus side fails, the MGate 5105 can be configured to
react in one of the three ways: keep the latest data, clear
data to zero, or user-defined value
Fault Timeout
0 to 60000 ms
Define the communication timeout for the Modbus side.