Moxa Technologies MGate 5105-MB-EIP Series - Page 78

MGate 5105-MB-EIP Series User Manual
78
Parameters
Value
Default
Description
Message meter size (0.0 to 16.0 K) 4
Depending on the cloud service’s pricing structure,
the message meter size can be configured. For
example, Azure’s message meter size is 4k;
Alibaba Cloud’s message meter size 0.5k for a free
tier service.
Auto statistics reset
Disable,
Enable
Disable Enable/Disable auto reset monthly statistics
Parameters
Value
Description
Target
Current target connecting to Cloud Service
Connection status
Connected/Connecting/
Disconnected
Current connection status
Diagnostics log
Connection behavior and event log messages for
troubleshooting
Parameters
Description
Buffer Overflow in SD
card
The data statistics of microSD card. If the data overflow function is disabled or the
buffering data is accurately stored in microSD card, the “No overflow” notification
will be shown.
Parameters
Description
Message
The total messages and individual message will be listed, such as total message or
individual message
Item
Current item of messages, such as total pub units, total pub data, total D2C units
(for Azure), total D2C data (for Azure), pub unit, pub data
Value
Current value of the items, such as “times of unit” for (total) pub unit, “K bytes” for
(total) pub data
System Monitoring – Protocol Status – Modbus RTU/ASCII Traffic
For troubleshooting or management purposes, you can monitor the Modbus RTU/ASCII data passing
through the MGate 5105-MB-EIP on the network. Rather than simply echoing the data, MGate Manager
presents the data in an intelligent, easy-to-understand format with clearly designated fields, including
source, type, destination, contents, and more. Events can be filtered in different ways, and the complete log
can be saved to a file for later analysis.