NPort 5600 Series User’s Manual Web Console Configuration
5-2
Opening Your Browser
1. Open your browser with the cookie function enabled. (To enable your browser for cookies,
right click your desktop Internet Explorer icon, select Properties, click the Security tab, and
then select the three Enable options as shown in the figure below.)
2. Type 192.168.127.254 in the Address input box (use the correct IP address if different from
the default), and then press Enter.
3. Input the password if prompted. The password will be transmitted with MD5 encryption over
the Ethernet.
Note that you will not be prompted to enter the password if the NPort is not currently
password protected.
ATTENTION
If you use other web browsers, remember to Enable the functions to “allow cookies that are
stored on your computer” or “allow per-session cookies.”
NPort 5600 series uses cookies only for “password” transmission.
To Next Page
Loading...
Need help?
General
