NPort 5600 Series User’s Manual Web Console Configuration
5-33
PPP Mode
PPP provides standard PPP service for dial-in.
Inactivity time
Setting Factory Default Necessity
0 to 65535 ms 0 Optional
Idle time setting for auto-disconnection. 0 min. means it will never disconnect.
TCP/IP compression
Setting Factory Default Necessity
Yes or No No Optional
Depends on whether the remote user's application requests compression.
Incoming PAP check
Setting Factory Default Necessity
Yes or No No Optional
Depends on whether the remote user's application requests PAP check.
Source IP address
Setting Factory Default Necessity
Source IP address Required
Destination IP address
Setting Factory Default Necessity
Destination IP address Required
Designation IP address is IP address of remote dial-in server.
To Next Page
Loading...
Need help?
General
