NPort 5600 Series User’s Manual Configuring NPort Administrator
6-14
2. The Import Configuration function is used to import an NPort configuration from a file into
one or more of the same model NPort.
To import a configuration, first select the target servers (use the left mouse button to select
servers; simply hold down the Ctrl key when selecting the second, third, etc., NPort).
ATTENTION
You can simultaneously import the same configuration file into multiple NPort 5600s that are of
the same model.
To select multiple NPort 5600s, hold down the Ctrl key when selecting an additional NPort
5600, or hold down the Shift key to select a block of NPort 5600s.
Monitor
There are two methods available to start the Monitor function.
1. First use Broadcast Search under the Configuration Function group, and then click Monitor
Add Target Select target from the list.
2. First click Monitor, and then Add Target Rescan.
3. Select Broadcast under the Configuration menu bar item.
To Next Page
Loading...
Need help?
General
