Moxa Technologies NPort 5610-8 User Manual

NPort 5600 Series User’s Manual Web Console Configuration
5-35
Accessible IP Settings allows you to add or block remote host IP addresses to prevent
unauthorized access. Access to NPort is controlled by IP address. That is, if a host’s IP address is
in the accessible IP table, then the host will be allowed to access the NPort. You can allow one of
the following cases by setting the parameter.
 Only one host with a specific IP address can access the NPort
Enter “IP address/255.255.255.255” (e.g., “192.168.1.1/255.255.255.255”).
Hosts on a specific subnet can access the NPort
Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”).
 Any host can access the NPort
Disable this function. Refer to the following table for more details about the configuration
example.
Allowable Hosts Input format
Any host Disable
192.168.1.120 192.168.1.120 / 255.255.255.255
192.168.1.1 to 192.168.1.254 192.168.1.0 / 255.255.255.0
192.168.0.1 to 192.168.255.254 192.168.0.0 / 255.255.0.0
192.168.1.1 to 192.168.1.126 192.168.1.0 / 255.255.255.128
192.168.1.129 to 192.168.1.254 192.168.1.128 / 255.255.255.128
PPP User Table

Moxa Technologies NPort 5610-8 Specifications

General

Brand	Moxa Technologies
Model	NPort 5610-8
Category	Server
Language	English