NPort 5600 Series User’s Manual Configuring NPort Administrator
6-9
4. The previous “Lock” status will switch to “Unlock” status.
Administrator will keep this NPort in the Unlock status throughout this Administrator session.
The six states are as follows (note that the term Fixed is borrowed from the standard fixed IP
address networking terminology):
Lock
The NPort is password protected, “Broadcast Search” was used to locate it, and the password
has not yet been entered from within the current Administrator session.
Unlock
The NPort is password protected, “Broadcast Search” was used to locate it, and the password
has been entered from within the current Administrator session. Henceforth during this
Administrator session, activating various utilities for this NPort will not require re-entering
the server password.
Blank
The NPort is not password protected, and “Broadcast Search” was used to locate it.
Fixed
The NPort is not password protected, and “Search by IP address” was used to locate it.
Lock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the
password has not yet been entered from within the current Administrator session.
Unlock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the
password has been entered from within the current Administrator session. Henceforth during
this Administrator session, activating various utilities for this NPort will not require
re-entering the server password.
To Next Page
Loading...
Need help?
General
