NPort 5600 Series User’s Manual Introduction
1-4
RS-485 Data Direction ADDC™ (Automatic Data Direction Control)
Power Line Protection
Level 3 Burst (EFT), EN61000-4-4
Level 3 Surge, EN61000-4-5
Advanced Built-in Features
HMI LCM display with four push buttons (does not apply to wide
temperature models)
Buzzer
Real-Time Clock
Watch Dog Timer
Serial Communication Parameters
Parity None, Even, Odd, Space, Mark
Data Bits 5, 6, 7, 8
Stop Bit 1, 1.5, 2
Flow Control RTS/CTS, XON/XOFF, DSR/DTR (Excluded NPort 5630)
Transmission Speed 50 bps to 921.6 Kbps
Software Features
Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP,
HTTP, SMTP, SNTP, Rtelnet, ARP, PPP, RFC2217
Utilities NPort Administrator for Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64
OS Driver Support Real COM drivers for: Windows 95/98/ME/NT/2000, Windows
XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP
Embedded
Real TTY driver for: Linux 2.4.x, 2.6.x kernel
Fixed TTY drivers for: SCO Unix, SCO OpenServer, UnixWare 7,
UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD,
AIX 5.x
Configuration Web Browser, Telnet Console, or Windows Utility
Power Requirements
Power Input
100 to 240 VAC, 47 to 63 Hz, or ±48 VDC
(20 to 72 VDC, -20 to -72 VDC)
Power Consumption NPort 5610-16/8: 141 mA for 100V, 93 mA for 240V
NPort 5610-16/8-48V: 135 mA (at 48V max.)
NPort 5630-16/8: 152 mA for 100V, 98 mA for 240V
NPort 5650-8/16: 158 mA @ 100 VAC, 102 mA @ 240 VAC
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 110 mA @ 240
VAC
NPort 5650-8/16-M-SC: 174 mA @ 100 VAC, 113 mA @ 240
VAC
To Next Page
Loading...
Need help?
General
